LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2000 >> Contour SE, 2.0 3, Standard >> Repair and Diagnosis >> External Pages >> Different car >> Section 1851 (Safety Belt System - F-150 & Mark LT) >> General Procedures >> Safety Belt Cleaning >> All seats

All seats

WARNING: This page is about a different car, the 2007 Lincoln Mark LT and 2007 Ford Pickup. However, it is still accessible from the selected car via links, so may be relevant.
  1. Reverse the procedure steps to re-assemble the seat.
    • Make sure the safety belts and buckles are accessible to the occupants after installation.
    • Make sure the safety belt retractor operates without excessive effort or binding.
    • Check the active restraint system for correct operation. For additional information, refer to Safety Belt System  in this article.