LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2000 >> Contour SE, 2.0 3, Standard >> Repair and Diagnosis >> External Pages >> Different car >> Section 1835 (Seat System - F-150 & Mark LT) >> Disassembly And Assembly >> Seat Backrest - Front, With Seat Integrated Restraints (SIR) >> Notes

Seat Backrest - Front, With Seat Integrated Restraints (SIR): Notes

WARNING: This page is about a different car, the 2007 Lincoln Mark LT and 2007 Ford Pickup. However, it is still accessible from the selected car via links, so may be relevant.
Special Tools

Illustration Tool Name Tool Number
GF0000049
Vehicle Communication Module (VCM) and Integrated Diagnostic System (IDS) software with appropriate hardware, or equivalent scan tool  
Fig 1: Identifying Front Seat Backrest With Seat Integrated Restraints (SIR) With Specifications
GF0001880Courtesy of FORD MOTOR CO.
Item Part Number Description
1 611A09 Head restraint
2 613D58 Head restraint sleeve
3 613D58 Head restraint sleeve
4 610E02 Inboard safety belt tower screw cover
5 610E03 Outboard safety belt tower screw cover
6 - Safety belt tower screws (4 required)
7 610E06 Safety belt tower cover
8 64417 Backrest trim cover
9 64811 Backrest foam pad
10 - Backrest heater element electrical connector (if equipped)
11 - Safety belt retractor bolt
12 611B09 Safety belt retractor
13 - Safety belt tower bracket bolt
14 60299 Safety belt tower bracket
15 65501 Lumbar assembly (if equipped)
16 - Backrest frame recliner bolts (2 required)
17 619A75 Backrest frame recliner
18 17891 Recliner U-channel strut
19 61019 Backrest frame
20 - Recliner U-channel strut bolt (2 required)
21 - Backrest frame recliner bolt
22 62622 Lumbar knob (if equipped)