LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2000 >> Contour SE, 2.0 3, Standard >> Repair and Diagnosis >> External Pages >> Different car >> Section 1807 (Automatic Transmission - 4R70E/4R75E - F150 & Mark LT) >> In-Vehicle Servicing >> Transmission Filler Tube >> Removal And Installation

Removal And Installation

WARNING: This page is about a different car, the 2007 Lincoln Mark LT and 2007 Ford Pickup. However, it is still accessible from the selected car via links, so may be relevant.
  1. Remove the transmission fluid filler tube bolt from the side of the RH cylinder head.
    • To install, tighten to 12 Nm (9 lb-ft).
    2. Fig 1: Locating Transmission Fluid Filler Tube Bolt
    GF0003491Courtesy of FORD MOTOR CO.
  2. Remove the transmission fluid filler tube.
    Fig 2: Locating Transmission Fluid Filler Tube
    GF0003492Courtesy of FORD MOTOR CO.
  3. To install, reverse the removal procedure.
scientia non olet · About LEMON Manuals