LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2000 >> Contour SE, 2.0 3, Standard >> Repair and Diagnosis >> External Pages >> Different car >> Section 1807 (Automatic Transmission - 4R70E/4R75E - F150 & Mark LT) >> In-Vehicle Servicing >> 1-2 Accumulator >> Removal

1-2 Accumulator: Removal

WARNING: This page is about a different car, the 2007 Lincoln Mark LT and 2007 Ford Pickup. However, it is still accessible from the selected car via links, so may be relevant.
  1. With the vehicle in NEUTRAL, position it on a hoist. For additional information, refer to JACKING AND LIFTING article.
  2. Drain transmission fluid and remove the transmission fluid pan and filter. For additional information, refer to Fluid Pan, Gasket and Filter .
  3. Compress the 1-2 accumulator piston and remove the accumulator piston retaining ring.
    4. Fig 1: Locating Accumulator Piston Retaining Ring
    G03888654Courtesy of FORD MOTOR CO.
  4. Remove the 1-2 shift accumulator assembly.
    • Remove the 1-2 accumulator cover.
    • Remove the inner and outer 1-2 accumulator springs.
    • Remove the 1-2 accumulator piston.
    • Remove the 1-2 accumulator upper spring.
    5. Fig 2: Identifying 1-2 Shift Accumulator Assembly
    GF0003533Courtesy of FORD MOTOR CO.
scientia non olet · About LEMON Manuals