Cylinder Head: Notes
WARNING: This page is about a different car, the 2007 Lincoln Mark LT and 2007 Ford Pickup. However, it is still accessible from the selected car via links, so may be relevant.
Special Tools
| Illustration | Tool Name | Tool Number |
|---|---|---|
| Remover/Installer, Cylinder Head | 303-572 (T97T-6000-A) | |
| Compressor, Valve Spring | 303-1039 | |
| Locking Tool, Camshaft Phaser Sprocket | 303-1046 | |
| Installer, Crankshaft Vibration Damper | 303-102 (T74P-6316-B) | |
| Installer, Crankshaft Front Seal | 303-635 | |
| Installer, Front Cover Seal | 303-335 (T88T-6701-A) | |
| Holding Tool, Crankshaft | 303-448 (T93P-6303-A) | |
| Alignment Pins, Cylinder Head | 303-1040 (SR-015486) |
Material
| Item | Specification |
|---|---|
| Motorcraft SAE 5W-20 Premium Synthetic Blend Motor Oil XO-5W20-QSP (US); Motorcraft SAE 5W-20 Super Premium Motor Oil CXO-5W20-LSP12 (Canada); or equivalent |
WSS-M2C930-A |
| Silicone Gasket and Sealant TA-30 |
WSE-M4G323-A4 |
| Motorcraft Metal Surface Prep ZC-31 |
- |
| Silicone Gasket Remover ZC-30 |
- |
| Threadlock 262 TA-26 |
WSK-M2G351-A6 |
| Hydraulic Chain Tensioner Retaining Clip 1L3Z-6P250-AA |
- |