LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2000 >> Contour SE, 2.0 3, Standard >> Repair and Diagnosis >> External Pages >> Different car >> Section 1802 (Front Drive Axle/Differential -- F-150 & Mark LT) >> Disassembly And Assembly >> Differential Case >> Disassembly

Differential Case: Disassembly

WARNING: This page is about a different car, the 2007 Lincoln Mark LT and 2007 Ford Pickup. However, it is still accessible from the selected car via links, so may be relevant.
  1. Remove the differential pinion shaft lock bolt.
    Fig 1: Removing The Differential Pinion Shaft Lock Bolt
    GF0000853Courtesy of FORD MOTOR CO.
  2. Remove the differential pinion shaft.
    Fig 2: Removing The Differential Pinion Shaft
    GF0000854Courtesy of FORD MOTOR CO.
  3. Rotate and remove the differential pinion gears and differential pinion gear thrust washers.
    Fig 3: Removing Differential Pinion Gears
    GF0000855Courtesy of FORD MOTOR CO.
  4. Remove the differential side gears and the differential side gear thrust washers.
    Fig 4: Removing Differential Side Gears
    GF0000856Courtesy of FORD MOTOR CO.
scientia non olet · About LEMON Manuals