LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2000 >> Contour SE, 2.0 3, Standard >> Repair and Diagnosis >> External Pages >> Different car >> Section 1796 (Front Disc Brake System - F150 & Mark LT) >> Removal And Installation >> Front Disc Brake - Rear Wheel Drive (RWD) >> Installation

Front Disc Brake - Rear Wheel Drive (RWD): Installation

WARNING: This page is about a different car, the 2007 Lincoln Mark LT and 2007 Ford Pickup. However, it is still accessible from the selected car via links, so may be relevant.
  1. Position the brake disc on the spindle.
    2. NOTE: Tighten the spindle nut to the specified torque. Rotate the disc counterclockwise 5 rotations and then recheck the torque.
  2. Install a new spindle nut.
    • Tighten to 400 Nm (295 lb-ft).
  3. Install the spindle nut retainer and a new cotter pin.
  4. Position the brake caliper and anchor plate assembly and install 2 new bolts.
    • Tighten to 200 Nm (148 lb-ft).
scientia non olet · About LEMON Manuals