LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2000 >> Contour SE, 2.0 3, Standard >> Repair and Diagnosis >> External Pages >> Different car >> Section 1791 (Engine Controls - Diagnostic Subroutines -- Diesel 6.0L (99P E-Series & 99P F450/550)) >> Performance Diagnostic Procedures >> 14. Crankcase Pressure Test >> Purpose:

14. Crankcase Pressure Test: Purpose:

WARNING: This page does not describe the selected car, but rather 7 other vehicles, including the 2007 Ford RV Cutaway, 2007 Ford Pickup, 2007 Ford F550 Super Duty, 2007 Ford F450 Super Duty, and 2007 Ford Econoline. However, it is still accessible from the selected car via links, so may be relevant.

The purpose of this test is to measure the crankcase pressure. Crankcase pressure is a measure of how well the cylinders are sealing.

Crankcase Pressure Test - F-Super Duty 

Instrument Specification Measurement
0-112 mm-Hg (0 to 60 H2 O) Magnehelic® gauge Less than 15 mm-Hg (8 H2 O)  

If greater than 15 mm-Hg (8 H2 O), refer to the appropriate ENGINE article.

Fig 1: Checking Crankcase Pressure - F-Super Duty
GF0001642Courtesy of FORD MOTOR CO.