LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2000 >> Contour SE, 2.0 3, Standard >> Repair and Diagnosis >> External Pages >> Different car >> Section 1791 (Engine Controls - Diagnostic Subroutines -- Diesel 6.0L (99P E-Series & 99P F450/550)) >> Diagnostic Trouble Code (DTC) Charts and Descriptions >> P2104 - Throttle Actuator Control System - Forced Idle

P2104 - Throttle Actuator Control System - Forced Idle

WARNING: This page does not describe the selected car, but rather 7 other vehicles, including the 2007 Ford RV Cutaway, 2007 Ford Pickup, 2007 Ford F550 Super Duty, 2007 Ford F450 Super Duty, and 2007 Ford Econoline. However, it is still accessible from the selected car via links, so may be relevant.
P2104 - THROTTLE ACTUATOR CONTROL SYSTEM - FORCED IDLE

Description:  This DTC is set when the powertrain control module (PCM) detects concerns with 2 of the accelerator pedal position (APP) sensor input signals. The PCM limits the engine to only operate at idle.
Possible Causes: 
  • APP2 circuit short to APP3 circuit
  • APP sensor
Diagnostic Aids:  Monitor the APP1, APP2, and APP3 PIDs while applying and releasing the accelerator pedal.
Application    Key On Engine Off  Key On Engine Running  Continuous Memory 
All   refer to PINPOINT TEST AG .
scientia non olet · About LEMON Manuals