LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2000 >> Contour SE, 2.0 3, Standard >> Repair and Diagnosis >> External Pages >> Different car >> Section 1790 (Engine Controls - Pinpoint Tests - Diesel 6.0L (99P E-Series & 99P F450/550)) >> PINPOINT TEST F: Intake Air Temperature (IAT) Sensor >> Introduction

PINPOINT TEST F: Intake Air Temperature (IAT) Sensor: Introduction

WARNING: This page does not describe the selected car, but rather 7 other vehicles, including the 2007 Ford RV Cutaway, 2007 Ford Pickup, 2007 Ford F550 Super Duty, 2007 Ford F450 Super Duty, and 2007 Ford Econoline. However, it is still accessible from the selected car via links, so may be relevant.

This pinpoint test is intended to diagnose the following:

Fig 1: Mass Air Flow/Intake Air Temperature (MAF/IAT) Sensor Connector - A
GF0001541Courtesy of FORD MOTOR CO.
Fig 2: Mass Air Flow/Intake Air Temperature (MAF/IAT) Sensor Connector - B
GF0001488Courtesy of FORD MOTOR CO.
Fig 3: Mass Air Flow/Intake Air Temperature (MAF/IAT) Sensor Connector - C
GF0001582
Vehicle Connector Pin Circuit
E-Series A 2
1
SIGRTN
IAT
F-Super Duty vehicles with an integrated MAF/IAT sensor B 1
6
SIGRTN
IAT
F-Super Duty vehicles with a stand alone IAT sensor C 1
2
SIGRTN
IAT
Fig 4: Powertrain Control Module Connector Terminals
GF0001647
Pin Circuit
B20, B33, E25 SIGRTN (Signal Return)
B43 IAT (Intake Air Temperature)