LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2000 >> Contour SE, 2.0 3, Standard >> Repair and Diagnosis >> External Pages >> Different car >> Section 1790 (Engine Controls - Pinpoint Tests - Diesel 6.0L (99P E-Series & 99P F450/550)) >> PINPOINT TEST AH: Visctronic Drive Fan (VDF) >> Introduction

PINPOINT TEST AH: Visctronic Drive Fan (VDF): Introduction

WARNING: This page does not describe the selected car, but rather 7 other vehicles, including the 2007 Ford RV Cutaway, 2007 Ford Pickup, 2007 Ford F550 Super Duty, 2007 Ford F450 Super Duty, and 2007 Ford Econoline. However, it is still accessible from the selected car via links, so may be relevant.
WARNING: To avoid the possibility of personal injury or damage to the vehicle, do not operate the engine until the fan blade has been first examined for possible cracks and separation. Failure to follow these instructions may result in personal injury or death.

This pinpoint test is intended to diagnose the following:

Fig 1: Visctronic Drive Fan (VDF) Connector
GF0001651
Pin Circuit
1 FSS (Fan Speed Sensor)
2 FSS SIGRTN
6 VBPWR (Vehicle Buffered Power)
4 VDF (Visctronic Drive Fan)
5 VPWR (Vehicle Power)
Fig 2: Powertrain Control Module Connector Terminals
GF0001647
Pin Circuit
E6 FSS (Fan Speed Sensor)
E22 FSS SIGRTN
E46 VBPWR (Vehicle Buffered Power)
E14 VDF (Visctronic Drive Fan)