LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2000 >> Contour SE, 2.0 3, Standard >> Repair and Diagnosis >> External Pages >> Different car >> Section 1784 (Engine Controls - Powertrain DTC Charts And Descriptions (Except Diesel & Hybrid)) >> DTC Diagnosis >> U1039 - SCP (J1850) Invalid Or Missing Data For Vehicle Speed

U1039 - SCP (J1850) Invalid Or Missing Data For Vehicle Speed

WARNING: This page does not describe the selected car, but rather 32 other vehicles, including the 2007 Mercury Mountaineer, 2007 Mercury Monterey, 2007 Mercury Montego, 2007 Mercury Milan, and 2007 Mercury Mariner. However, it is still accessible from the selected car via links, so may be relevant.
U1039 - SCP (J1850) INVALID OR MISSING DATA FOR VEHICLE SPEED

Description:   
Possible Causes:  Network DTC(s) occur during module-to-module communication concerns. Two types of network concerns can be categorized:
  • Invalid data network concerns - data is transferred within the normal inter-module message, but contains known invalid data. The transmitting module logs a DTC related to the invalid data concern.
  • Missing message network concerns - missing message concerns are logged by the module upon failure to receive a message from another module within a defined retry period.
Diagnostic Aids:  Carry out the on-board diagnostics for the associated network module. For additional information concerning the description and operation of the vehicle communication network, refer to the appropriate MODULE COMMUNICATIONS NETWORK article.
Application  Key On Engine Off  Key On Engine Running  Continuous Memory 
All Refer to the appropriate VEHICLE DYNAMIC SYSTEMS article.