LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2000 >> Contour SE, 2.0 3, Standard >> Repair and Diagnosis >> External Pages >> Different car >> Section 1749 (Exterior Lighting) >> Removal And Installation >> Rear Lamp Assembly >> Removal and Installation

Removal and Installation

WARNING: This page is about a different car, the 2006 Mercury Milan, 2006 Lincoln Zephyr, and 2006 Ford Fusion. However, it is still accessible from the selected car via links, so may be relevant.
  1. Remover the pin-type retainer and position the luggage compartment trim panel aside.
  2. Remove the 3 nuts and the rear lamp assembly.
    • Disconnect the electrical connectors.
    • To install, tighten the nuts to 6 Nm (53 lb-in).
  3. To install, reverse the removal procedure.
scientia non olet · About LEMON Manuals