LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2000 >> Contour SE, 2.0 3, Standard >> Repair and Diagnosis >> External Pages >> Different car >> Section 1699 (Safety Belt System) >> Description And Operation >> Safety Belt System >> Safety Belt Tension Sensor

Safety Belt Tension Sensor

WARNING: This page is about a different car, the 2006 Mercury Montego, 2006 Ford Freestyle, and 2006 Ford Five Hundred. However, it is still accessible from the selected car via links, so may be relevant.

The safety belt tension sensor is part of the front passenger safety belt and retractor assembly. The safety belt tension sensor is located at the front passenger safety belt anchor point and is used in conjunction with the occupant classification sensor (OCS) system. For additional information, refer to SUPPLEMENTAL RESTRAINT SYSTEM .

scientia non olet · About LEMON Manuals