LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2000 >> Contour SE, 2.0 3, Standard >> Repair and Diagnosis >> External Pages >> Different car >> Section 1678 (Body Panel System - Front End Body Panels) >> General Procedures >> Fender Splash Shield - Freestyle >> Removal and Installation

Removal and Installation

WARNING: This page is about a different car, the 2006 Mercury Montego, 2006 Ford Freestyle, and 2006 Ford Five Hundred. However, it is still accessible from the selected car via links, so may be relevant.
  1. Remove the front wheel and tire assembly. For additional information, refer to REMOVAL .
  2. Remove the 8 fender splash shield scrivets (LH) or 13 fender splash shield scrivets (RH).
  3. Remove the 3 fender splash shield screws.
  4. Remove the fender splash shield.
  5. To install, reverse the removal procedure.
scientia non olet · About LEMON Manuals