LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2000 >> Contour SE, 2.0 3, Standard >> Repair and Diagnosis >> External Pages >> Different car >> Section 1632 (Wheels & Tires) >> Diagnosis And Testing >> Wheels And Tires >> Inspection and Verification >> Road Test

Road Test

WARNING: This page is about a different car, the 2006 Mercury Montego, 2006 Ford Freestyle, and 2006 Ford Five Hundred. However, it is still accessible from the selected car via links, so may be relevant.

Verify the customer concern by carrying out a road test on a smooth road. If any vibrations are apparent, go to ROAD TEST .

To maximize tire performance, inspect for signs of incorrect inflation and uneven wear, which can indicate a need for balancing, rotation or front suspension alignment.

Correct tire pressure and driving techniques have an important influence on tire life. Heavy cornering, excessively rapid acceleration and unnecessary sharp braking increases tire wear.

New tires must follow the recommended:

Wheel and tire assemblies are attached by 5 wheel nuts.

It is mandatory to use only the tire sizes recommended on the tire table attached to the vehicle. Larger or smaller tires can damage the vehicle, affect durability, and require changing the speedometer calibration. Make sure wheel size and offsets match those recommended for the tire in use.

  1. Inspect for signs of uneven wear that can indicate a need for balancing, rotation, front suspension alignment, damaged tie-rod or steering components.
  2. Check tires for:
    • cuts.
    • stone bruises.
    • abrasions
    • blisters.
    • embedded objects.
  3. Tread wear indicators are molded into the bottom of the tread grooves. Install a new tire when the indicator bands become visible.