LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2000 >> Contour SE, 2.0 3, Standard >> Repair and Diagnosis >> External Pages >> Different car >> Section 1622 (Seat System -- F250-F550 Super Duty) >> Disassembly And Assembly >> Seat Backrest - Front, Bucket and 40 Percent >> Disassembly and Assembly

Disassembly and Assembly

WARNING: This page is about a different car, the 2006 Ford Pickup, 2006 Ford F550 Super Duty, 2006 Ford F450 Super Duty, and 2006 Ford Cab & Chassis. However, it is still accessible from the selected car via links, so may be relevant.
  1. Remove the seat cushion. For additional information, refer to SEAT CUSHION - FRONT, BUCKET AND 40 PERCENT .
  2. Remove the armrest. For additional information, refer to SEAT ARMREST - BUCKET, WITHOUT SEAT INTEGRATED RESTRAINTS (SIR) .
  3. Remove the seat backrest latch. For additional information, refer to SEAT LATCH - BUCKET AND 40 PERCENT .
    4. CAUTION: Use care when separating the seat backrest trim cover from the hook and loop strip, or the hook and loop strip can be torn from the seat backrest foam.
  4. Position the upholstery and release the hook and loop strip.
  5. Remove the seat backrest cover.
  6. Remove the seat cushion foam pad from the frame.
  7. To assemble, reverse the disassembly procedure.
scientia non olet · About LEMON Manuals