LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2000 >> Contour SE, 2.0 3, Standard >> Repair and Diagnosis >> External Pages >> Different car >> Section 16 (Engine - 4.2L V6 - VIN 2) >> Removal & Installation >> Front Cover Oil Seal >> Installation

Front Cover Oil Seal: Installation

WARNING: This page is about a different car, the 2001 Ford Pickup, 2001 Ford Econoline, 2000 Ford Pickup, and 2000 Ford Econoline. However, it is still accessible from the selected car via links, so may be relevant.

To install, reverse removal procedure. Lubricate oil seal bore and seal lip with engine oil before installing. Apply silicone sealant to keyway of crankshaft damper before installing. Install seal. Tighten bolts to specification. See TORQUE SPECIFICATIONS .

scientia non olet · About LEMON Manuals