LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2000 >> Contour SE, 2.0 3, Standard >> Repair and Diagnosis >> External Pages >> Different car >> Section 16 (Engine - 4.2L V6 - VIN 2) >> Removal & Installation >> Camshaft >> Installation

Removal & Installation: Camshaft: Installation

WARNING: This page is about a different car, the 2001 Ford Pickup, 2001 Ford Econoline, 2000 Ford Pickup, and 2000 Ford Econoline. However, it is still accessible from the selected car via links, so may be relevant.

Coat camshaft bearings, journals and lobes with Engine Assembly Lubrication (D9AZ-19579-D). Install camshaft. To complete installation, reverse removal procedures. Tighten all nuts and bolts to specification. See TORQUE SPECIFICATIONS .

scientia non olet · About LEMON Manuals