Cylinder Block

WARNING: This page is about a different car, the 2001 Ford Pickup, 2001 Ford Econoline, 2000 Ford Pickup, and 2000 Ford Econoline. However, it is still accessible from the selected car via links, so may be relevant.

CYLINDER BLOCK

Application

In. (mm)

Cylinder Bore

Standard Diameter

3.81 (96.800)

Maximum Taper

.002 (.05)

Maximum Out-Of-Round

.002 (.05)

Maximum Deck Warpage ⁽¹⁾

.003 (.08)

⁽¹⁾	Specification is within a 6" (152 mm) area. Overall warpage is .006" (.15 mm). DO NOT machine more than .010" (.25 mm) from original gasket surface.