LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2000 >> Contour SE, 2.0 3, Standard >> Repair and Diagnosis >> External Pages >> Different car >> Section 1587 (Interior Trim And Ornamentation - F250-F550) >> Removal And Installation >> A-Pillar Trim Panel >> Removal and Installation

Removal and Installation

WARNING: This page is about a different car, the 2006 Ford Pickup. However, it is still accessible from the selected car via links, so may be relevant.
NOTE: Right side shown, left side similar.
  1. Remove the right front inside assist handle covers.
    Fig 1: Locating Right Front Inside Assist Handle Covers
    G04645795Courtesy of FORD MOTOR CO.
  2. Remove the bolts.
    Fig 2: Locating Bolts
    G04645796Courtesy of FORD MOTOR CO.
  3. NOTE: Carefully rotate the A-pillar trim panel during this step.
    Fig 3: Locating A-Pillar Trim Panel
    G04645797Courtesy of FORD MOTOR CO.
  4. Pry the A-pillar trim panel to remove.
  5. To install, reverse the removal procedure.