LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2000 >> Contour SE, 2.0 3, Standard >> Repair and Diagnosis >> External Pages >> Different car >> Section 1577 (Brake System - General Information -- F250-F550 Super Duty) >> Diagnosis And Testing >> Brake System >> Brake Booster >> Accumulator, Hydro-Boost® Only

Accumulator, Hydro-Boost® Only

WARNING: This page is about a different car, the 2006 Ford Pickup, 2006 Ford F550 Super Duty, 2006 Ford F450 Super Duty, and 2006 Ford Cab & Chassis. However, it is still accessible from the selected car via links, so may be relevant.
  1. Start and run the engine.
  2. Stop the engine.
  3. Apply the brakes. The accumulator in the Hydro-Boost® power brake booster should retain enough pressure for at least 2 power assisted brake operations. If no power assist is felt, install a new Hydro-Boost® power brake booster and retest the system.
scientia non olet · About LEMON Manuals