LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2000 >> Contour SE, 2.0 3, Standard >> Repair and Diagnosis >> External Pages >> Different car >> Section 1564 (Automatic Transmission - F250-F550 Super Duty) >> Specifications >> Band, Clutch, Solenoid, Application Chart (D)

Band, Clutch, Solenoid, Application Chart (D)

WARNING: This page is about a different car, the 2006 Ford Pickup, 2006 Ford F550 Super Duty, 2006 Ford F450 Super Duty, and 2006 Ford Cab & Chassis. However, it is still accessible from the selected car via links, so may be relevant.
NOTE: The PTO may operate in any gear including PARK and NEUTRAL and does not require the OD OWC. The TCC may engage in PARK and NEUTRAL with PTO engaged.
BAND, CLUTCH, SOLENOID, APPLICATION CHART (D)

Range Selector Lever Position Gear TCC Torque Converter (3) OD OWC L/R OWC
P P LP/LA X X
N N LP/LA X X
R R LP/LA X -
OD with Tow/Haul OFF 1 (1) X X
OD with Tow/Haul OFF 2 (1) O/R X
OD with Tow/Haul OFF 3 (1) X O/R
OD with Tow/Haul OFF 4(2) (1) O/R O/R
OD with Tow/Haul OFF 5 (1) X O/R
OD with Tow/Haul OFF 6 (1) O/R O/R
(1) PCM Calibration Controlled
(2) Cold Strategy
(3) Directly Proportional

O/R = Overrunning
LP = Low Pressure
LA = Low Current
X = Holding