LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2000 >> Contour SE, 2.0 3, Standard >> Repair and Diagnosis >> External Pages >> Different car >> Section 1564 (Automatic Transmission - F250-F550 Super Duty) >> Specifications >> Band, Clutch, Solenoid, Application Chart (A)

Band, Clutch, Solenoid, Application Chart (A)

WARNING: This page is about a different car, the 2006 Ford Pickup, 2006 Ford F550 Super Duty, 2006 Ford F450 Super Duty, and 2006 Ford Cab & Chassis. However, it is still accessible from the selected car via links, so may be relevant.
NOTE: The power take off (PTO) may operate in any gear including PARK and NEUTRAL and does not require the overdrive (OD) one-way clutch (OWC). The torque converter clutch (TCC) may engage in PARK and NEUTRAL with PTO engaged.
BAND, CLUTCH, SOLENOID, APPLICATION CHART (A)

Range Selector Lever Position Gear Engine Braking Line Pressure PC-A (3) Forward Clutch Coast Clutch SSPC-A Coast Clutch (3)
P P - HP/LA(1) - - LP/HA
N N - HP/LA(1) - - LP/HA
R R - HP/LA(1) - A HP/LA
OD with Tow/Haul OFF 1 - HP/LA(1) A - LP/HA
OD with Tow/Haul OFF 2 - HP/LA(1) A - LP/HA
OD with Tow/Haul OFF 3 - HP/LA(1) A - LP/HA
OD with Tow/Haul OFF 4(2) Yes HP/LA(1) A - LP/HA
OD with Tow/Haul OFF 5 - HP/LA(1) A - LP/HA
OD with Tow/Haul OFF 6 Yes HP/LA(1) A - LP/HA
(1) PCM Calibration Controlled
(2) Cold Strategy
(3) Inversely Proportional

HP = High Pressure
LP = Low Pressure
HA = High Current
LA = Low Current
A = Applied