LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2000 >> Contour SE, 2.0 3, Standard >> Repair and Diagnosis >> External Pages >> Different car >> Section 1564 (Automatic Transmission - F250-F550 Super Duty) >> In-Vehicle Repair >> Transmission Insulator And Retainer >> Removal

Transmission Insulator And Retainer: Removal

WARNING: This page is about a different car, the 2006 Ford Pickup, 2006 Ford F550 Super Duty, 2006 Ford F450 Super Duty, and 2006 Ford Cab & Chassis. However, it is still accessible from the selected car via links, so may be relevant.
  1. With the vehicle in NEUTRAL, position on a hoist. For additional information, refer to JACKING & LIFTING .
  2. Remove the rear transmission insulator bolts and nuts.
    Fig 1: Locating Transmission Insulator Bolts
    G04649745Courtesy of FORD MOTOR CO.
  3. Raise the transmission upward, off the transmission insulator and remove the insulator.
    Fig 2: Locating Rear Transmission Mount
    G04649746Courtesy of FORD MOTOR CO.