LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2000 >> Contour SE, 2.0 3, Standard >> Repair and Diagnosis >> External Pages >> Different car >> Section 1564 (Automatic Transmission - F250-F550 Super Duty) >> In-Vehicle Repair >> Transmission Fluid Temperature (TFT) Sensor >> Removal

Transmission Fluid Temperature (TFT) Sensor: Removal

WARNING: This page is about a different car, the 2006 Ford Pickup, 2006 Ford F550 Super Duty, 2006 Ford F450 Super Duty, and 2006 Ford Cab & Chassis. However, it is still accessible from the selected car via links, so may be relevant.
  1. Remove the transmission fluid pan gasket and filter. For additional information, refer to FLUID PAN, GASKET AND FILTER .
  2. Disconnect the transmission fluid temperature (TFT) sensor electrical connector.
    Fig 1: Locating Temperature (TFT) Sensor Electrical Connector
    G03889115Courtesy of FORD MOTOR CO.
  3. Press the tab, rotate the sensor counterclockwise and pull out.
    Fig 2: Identifying TFT Sensor
    G03889116Courtesy of FORD MOTOR CO.
  4. Inspect the O-ring seal. If the O-ring seal is damaged, install a new O-ring seal.
scientia non olet · About LEMON Manuals