LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2000 >> Contour SE, 2.0 3, Standard >> Repair and Diagnosis >> External Pages >> Different car >> Section 1564 (Automatic Transmission - F250-F550 Super Duty) >> Diagnosis And Testing >> Pinpoint Tests - OSC Equipped Vehicle >> P2701 >> Testing

Pinpoint Tests - OSC Equipped Vehicle: P2701: Testing

WARNING: This page is about a different car, the 2006 Ford Pickup, 2006 Ford F550 Super Duty, 2006 Ford F450 Super Duty, and 2006 Ford Cab & Chassis. However, it is still accessible from the selected car via links, so may be relevant.

Overdrive Clutch failed on or off. REFER to PID P0730_STATUS CHART , found immediately after Output State Control (OSC) Mode in this section, for a specific failure. REFER to the SOLENOID APPLICATION CHARTS  located at the beginning of Pinpoint Tests - OSC Equipped Vehicles. If other solenoid DTCs are present, GO to PINPOINT TEST A . If only P0730 and/or 2700 series DTCs are present, INSTALL the appropriate clutch solenoid. CLEAR DTCs, road test. If the concern is still present, REPAIR/INSTALL new internal transmission components.

scientia non olet · About LEMON Manuals