Pinpoint Tests - OSC Equipped Vehicle: Notes

WARNING: This page is about a different car, the 2006 Ford Pickup, 2006 Ford F550 Super Duty, 2006 Ford F450 Super Duty, and 2006 Ford Cab & Chassis. However, it is still accessible from the selected car via links, so may be relevant.

SPECIAL TOOL(S) SPECIFICATIONS

Courtesy of FORD MOTOR CO.	Transmission Fluid Pressure Gauge 307-004 (T57L-77820-A)
Courtesy of FORD MOTOR CO.	Automotive Meter 73 III 105-R0057 or equivalent
Courtesy of FORD MOTOR CO.	Worldwide Diagnostic System (WDS) Vehicle Communication Module (VCM) and appropriate adapters, or equivalent diagnostic tool

NOTE: If equipped, turn the power take-off (PTO) unit off for correct test results. For a description of PTO operation, refer to TRANSMISSION ELECTRONIC CONTROL SYSTEM . On-Board Diagnostic is not accessible when the PTO unit is in operation. Shift solenoid B (SSB) is on when the PTO is in operation.

Any time an electrical connector or solenoid body is disconnected, inspect the connector for terminal condition, corrosion and contamination. Also inspect the connector seal for damage. Clean, repair or install a new connector as required.