LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2000 >> Contour SE, 2.0 3, Standard >> Repair and Diagnosis >> External Pages >> Different car >> Section 1542 (Front Drive Axle/Differential -- F250-F550 Super Duty) >> In-Vehicle Repair >> Axle Shaft Seal >> Removal

Axle Shaft Seal: Removal

WARNING: This page is about a different car, the 2006 Ford Pickup, 2006 Ford F550 Super Duty, 2006 Ford F450 Super Duty, and 2006 Ford Cab & Chassis. However, it is still accessible from the selected car via links, so may be relevant.
  1. Remove the wheel hub. For additional information, refer to FRONT SUSPENSION - FOUR WHEEL DRIVE (4WD) .
  2. Using a suitable tool, drive the axle shaft main seal out of the wheel knuckle.
    Fig 1: Removing Axle Shaft Main Seal
    G04644236
  3. Remove the axle shaft and main seal.
    Fig 2: Removing Axle Shaft And Main Seal
    G04644237
  4. Remove the axle shaft dust seal from the shaft.
    • Discard the seal.
      Fig 3: Removing Axle Shaft Seal
      G04644238
scientia non olet · About LEMON Manuals