LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2000 >> Contour SE, 2.0 3, Standard >> Repair and Diagnosis >> External Pages >> Different car >> Section 1481 (Manual Transmission) >> In-Vehicle Repair >> Halfshaft Seal >> Removal

Halfshaft Seal: Removal

WARNING: This page is about a different car, the 2006 Ford Escape. However, it is still accessible from the selected car via links, so may be relevant.
CAUTION: New halfshaft oil seals should be installed anytime the halfshafts are removed. Failure to install new halfshafts seals may result in transmission oil leak(s).
NOTE: RH intermediate shaft oil seal shown, LH halfshaft oil seal similar.
  1. Remove the RH intermediate shaft or LH halfshaft. For additional information, refer to FRONT DRIVE HALFSHAFTS .
  2. Using the special tools, remove the RH intermediate shaft oil seal or the LH halfshaft oil seal.
    Fig 1: Removing RH Intermediate Shaft Oil Seal
    G04620949Courtesy of FORD MOTOR CO.
scientia non olet · About LEMON Manuals