LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2000 >> Contour SE, 2.0 3, Standard >> Repair and Diagnosis >> External Pages >> Different car >> Section 148 (Wiper System & Washer System - F150 Pickup) >> Adjustments >> Wiper Arm & Blade Assembly

Wiper Arm & Blade Assembly

WARNING: This page is about a different car, the 2002 Ford Pickup. However, it is still accessible from the selected car via links, so may be relevant.
  1. Remove wiper arms from pivot shafts. Turn on wipers to allow motor to operate 3 or 4 cycles, then turn wipers off. Wiper pivot shafts will return to park position.
  2. Install arm and blade assemblies onto pivot shafts. Adjust clearance between center of wiper blade and windshield/cowl junction. Clearance should be 1.7-3.0" (45-75 mm) for driver's side, and 2.6-3.7" (65-93 mm) for passenger's side.
scientia non olet · About LEMON Manuals