LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2000 >> Contour SE, 2.0 3, Standard >> Repair and Diagnosis >> External Pages >> Different car >> Section 147 (Steering Column Switches) >> Removal & Installation >> Central Security Module >> Removal & Installation

Removal & Installation

WARNING: This page is about a different car, the 2002 Lincoln Blackwood. However, it is still accessible from the selected car via links, so may be relevant.
CAUTION: It is necessary to upload module configuration of central security module to New Generation Star (NGS) tester prior to module replacement. After new module is installed, download configuration to new module.

Disconnect negative battery cable. Central security module is located behind left side of instrument panel. Disconnect wiring harness connectors (Black 22-pin and Black 26-pin). Remove nuts and central security module. To install, reverse removal procedure.