Crankshaft Pulley: Removal

WARNING: This page is about a different car, the 2006 Mercury Mariner and 2006 Ford Escape. However, it is still accessible from the selected car via links, so may be relevant.

1.

With the vehicle in NEUTRAL, position it on a hoist. For additional information, refer to JACKING & LIFTING .

2.

Remove the accessory drive belt. For additional information, refer to ACCESSORY DRIVE SYSTEM - 3.0L (4V) .

3.

Use the special tool to hold the crankshaft pulley and remove the crankshaft pulley bolt.

GFD15544

Courtesy of FORD MOTOR COMPANY

4.

Using the special tool, remove the crankshaft pulley.

GFD15545

Courtesy of FORD MOTOR COMPANY