LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2000 >> Contour SE, 2.0 3, Standard >> Repair and Diagnosis >> External Pages >> Different car >> Section 1435 (Power Transfer Unit (PTU)) >> Removal >> Intermediate Shaft Seal

Intermediate Shaft Seal

WARNING: This page is about a different car, the 2006 Mercury Mariner and 2006 Ford Escape. However, it is still accessible from the selected car via links, so may be relevant.
SPECIAL TOOL

G00561908Courtesy of FORD MOTOR CO.
 Slide Hammer
100-001 (T50T-100-A)
G00561909Courtesy of FORD MOTOR CO.
 Remover, Halfshaft Oil Seal
308-428
  1. Remove the Power Transfer Unit (PTU) . For additional information, refer to POWER TRANSFER UNIT (PTU) - AUTOMATIC TRANSAXLE .
  2. Using the Halfshaft Oil Seal Remover and Slide Hammer, remove the intermediate shaft seal.
    3. Fig 1: Locating Halfshaft Oil Seal Remover And Slide Hammer
    G00561910Courtesy of FORD MOTOR CO.
scientia non olet · About LEMON Manuals