RH Rear

WARNING: This page is about a different car, the 2006 Mercury Grand Marquis and 2006 Ford Crown Victoria. However, it is still accessible from the selected car via links, so may be relevant.

When operating the RH rear window in the down direction, ground is provided from the driver window control switch through circuit 319 (YE/BK). Voltage is supplied to the right rear window motor through circuit 334 (RD/YE) and ground through circuit 333 (YE/RD).

When operating the right rear window in the up direction, ground is provided from the driver window control switch through circuit 320 (RD/BK). Voltage is supplied to the right rear window motor through circuit 333 (YE/RD) and ground through circuit 334 (RD/YE).

When the right rear power window is operated in the down direction from the driver window control switch, voltage is sent to right rear window control switch through circuit 320 (RD/BK), which transfers power to the right rear window motor through circuit 334 (RD/YE). Ground is provided to the right rear window control switch through circuit 319 (YE/BK), which transfers ground to the right rear window motor through circuit 333 (YE/RD). When the right rear window is operated in the up direction from the driver window control switch, voltage is sent to the right rear window control switch through circuit 319 (YE/BK), which transfers power to the right rear window motor through circuit 333 (YE/RD). Ground is provided to the right rear window switch through circuit 320 (RD/BK), which transfers ground to the right rear window motor through circuit 334 (RD/YE).