LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2000 >> Contour SE, 2.0 3, Standard >> Repair and Diagnosis >> External Pages >> Different car >> Section 1392 (Battery, Mounting And Cables) >> Removal And Installation >> Battery Tray >> Removal and Installation

Removal and Installation

WARNING: This page is about a different car, the 2006 Mercury Grand Marquis and 2006 Ford Crown Victoria. However, it is still accessible from the selected car via links, so may be relevant.
  1. Remove the battery. For additional information, refer to BATTERY  .
  2. Remove the 4 bolts and the battery tray.
    • To install, tighten to 12 Nm (9 lb-ft).
  3. To install, reverse the removal procedure.
scientia non olet · About LEMON Manuals