LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2000 >> Contour SE, 2.0 3, Standard >> Repair and Diagnosis >> External Pages >> Different car >> Section 1385 (HVAC Control System) >> Removal And Installation >> Vacuum Reservoir >> Removal and Installation

Removal and Installation

WARNING: This page is about a different car, the 2006 Mercury Grand Marquis and 2006 Ford Crown Victoria. However, it is still accessible from the selected car via links, so may be relevant.
  1. Remove the wiper mounting arm and pivot shaft. For additional information, refer to WIPERS AND WASHERS .
  2. Disconnect the 2 vacuum reservoir vacuum connectors.
  3. Remove the 2 vacuum reservoir retaining screws.
  4. Remove the vacuum reservoir.
  5. To install, reverse the removal procedure.
scientia non olet · About LEMON Manuals