LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2000 >> Contour SE, 2.0 3, Standard >> Repair and Diagnosis >> External Pages >> Different car >> Section 1372 (Engine Emission Control System) >> Removal And Installation >> Positive Crankcase Ventilation (PCV) Valve >> Removal and Installation

Removal and Installation

WARNING: This page is about a different car, the 2006 Mercury Grand Marquis and 2006 Ford Crown Victoria. However, it is still accessible from the selected car via links, so may be relevant.
  1. Disconnect the crankcase ventilation tube quick connect coupling from the PCV valve. For additional information, refer to FUEL SYSTEM-GENERAL INFORMATION .
  2. Disconnect the PCV valve electrical connector.
    3. CAUTION: A new PCV valve must be installed if removed. Upon removal, the plastic retaining ears of the PCV valve are sheared.
  3. Rotate the PCV valve and remove.
  4. To install, reverse the removal procedure.
scientia non olet · About LEMON Manuals