Crankshaft Rear Seal: Removal

WARNING: This page is about a different car, the 2006 Mercury Grand Marquis and 2006 Ford Crown Victoria. However, it is still accessible from the selected car via links, so may be relevant.

WARNING: If equipped with fire suppression system, depower the system. For important safety warnings and procedures, refer to FIRE SUPPRESSION SYSTEM .

With the vehicle in NEUTRAL, position it on a hoist. For additional information, refer to JACKING & LIFTING .
Remove the flexplate. For additional information, refer to FLEXPLATE .
Use the special tools to remove the crankshaft oil slinger.

Fig 1: Removing Crankshaft Rear Oil Seal Slinger
Courtesy of FORD MOTOR CO.
Use the special tools to remove the crankshaft rear seal.

Fig 2: Removing Crankshaft Rear Seal
Courtesy of FORD MOTOR CO.