LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2000 >> Contour SE, 2.0 3, Standard >> Repair and Diagnosis >> External Pages >> Different car >> Section 136 (Driveshaft -- F150) >> Overhaul >> Double CARDAN Universal Joints >> Disassembly

Double CARDAN Universal Joints: Disassembly

WARNING: This page is about a different car, the 2002 Ford Pickup. However, it is still accessible from the selected car via links, so may be relevant.
  1. Place the drive shaft on a suitable workbench. DO NOT damage the tube. Index mark the drive shaft components. See Fig 1 . Remove 2 snap rings from the drive shaft center yoke, and 2 snap rings from the drive shaft centering socket yoke. Clamp the "C" Frame and Screw Installer/Remover (205-086, T74P-4635-C), in a vise.
  2. Remove the bearing cups and the drive shaft centering socket yoke. Position the drive shaft center yoke in the "C" frame and screw installer/remover and press out a bearing cup. See Fig 2 . Rotate the drive shaft center yoke 180 degrees. Press on the spider to remove the opposite bearing cup.
  3. Position the drive shaft centering socket yoke in the "C" frame and screw installer/remover. See Fig 3 . Press out a bearing cup. Rotate the drive shaft centering socket yoke 180 degrees. Press on the spider to remove the opposite bearing cup. Remove the spider and the bearing cup.
  4. Remove the centering cup spring. See Fig 4 . Remove the 4 remaining snap rings. Position the drive shaft center yoke in the "C" frame and screw installer/remover. See Fig 5 . Press out a bearing cup. Rotate the drive shaft center yoke 180 degrees. Press on the spider to remove the opposite bearing cup. Remove the drive shaft center yoke.
  5. Remove the bearing cups and the spider. See Fig 6 . Position the drive shaft yoke in the "C" frame and screw installer/remover and press out a bearing cup. Rotate the drive shaft yoke 180 degrees. Press on the spider to remove the opposite bearing cup and remove the spider.
Fig 1: Identifying Index Marks On Center Yoke
G00196626Courtesy of FORD MOTOR CO.
Fig 2: Removing & Installing Center Socket Yoke
G00196627Courtesy of FORD MOTOR CO.
Fig 3: Removing & Installing Universal Joint (At Center Socket Yoke)
G00196628Courtesy of FORD MOTOR CO.
Fig 4: Removing & Installing Center Cup Spring
G00196629Courtesy of FORD MOTOR CO.
Fig 5: Removing & Installing Drive Shaft Center Yoke
G00196630Courtesy of FORD MOTOR CO.
Fig 6: Removing & Installing Universal Joint (At Drive Shaft)
G00196631Courtesy of FORD MOTOR CO.
scientia non olet · About LEMON Manuals