LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2000 >> Contour SE, 2.0 3, Standard >> Repair and Diagnosis >> External Pages >> Different car >> Section 1345 (Noise, Vibration & Harshness) >> Description And Operation >> Noise, Vibration and Harshness (NVH) >> Glossary of Terms >> Driveline Angles

Driveline Angles

WARNING: This page is about a different car, the 2006 Mercury Grand Marquis and 2006 Ford Crown Victoria. However, it is still accessible from the selected car via links, so may be relevant.

The differences of alignment between the transmission output shaft, the driveshaft and the rear axle pinion centerline.

Fig 1: Checking Driveline Angles
G04582667Courtesy of FORD MOTOR CO.