DTC P0193: Fuel Rail Pressure (FRP) Sensor Circuit High Input
WARNING: This page is about a different car, the 2006 Mercury Mariner and 2006 Ford Escape. However, it is still accessible from the selected car via links, so may be relevant.
P0193 - FUEL RAIL PRESSURE (FRP) SENSOR CIRCUIT HIGH INPUT
| Description: | The comprehensive component monitor (CCM) monitors the FRP sensor circuit to the PCM for high voltage. If voltage exceeds a calibrated limit for a calibrated amount of time during testing, the test fails. | ||
| Possible Causes: |
|
||
| Diagnostic Aids: | An FRP PID value greater than 4.75 volts during KOEO or KOER indicates a hard fault. | ||
| Application | Key On Engine Off | Key On Engine Running | Continuous Memory |
| All | GO to Pinpoint Test DD . | ||