LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2000 >> Contour SE, 2.0 3, Standard >> Repair and Diagnosis >> External Pages >> Different car >> Section 1335 (Engine Controls - Diagnostic Subroutines -- 6.0L (99P F450/550) Diesel) >> Performance Diagnostic Procedures >> 6a. KOEO Injector Electrical Self-Test >> Purpose: >> Notes

6a. KOEO Injector Electrical Self-Test: Purpose:: Notes

WARNING: This page does not describe the selected car, but rather 8 other vehicles, including the 2006 Ford RV Cutaway, 2006 Ford Pickup, 2006 Ford F550 Super Duty, 2006 Ford F450 Super Duty, and 2006 Ford Econoline. However, it is still accessible from the selected car via links, so may be relevant.
NOTE: Before carrying out the KOEO injector electrical self-test, allow the engine to stabilize at the temperature necessary to recreate the symptom. Access the PCM and record the freeze frame data. The freeze frame data contains information which can be used to recreate original conditions that caused the symptom. Refer to FREEZE FRAME DATA for more information.
NOTE: If unable to carry out KOEO Injector Electrical Self-Test, disconnect the FICM connector and check injectors for shorts or opens.

The purpose of this test is to determine if the injector coils and valves are functioning by energizing all injectors together and then each injector in numerical sequence (1 through 8).