LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2000 >> Contour SE, 2.0 3, Standard >> Repair and Diagnosis >> External Pages >> Different car >> Section 1335 (Engine Controls - Diagnostic Subroutines -- 6.0L (99P F450/550) Diesel) >> Performance Diagnostic Procedures >> 11. Carry Out The Key On Engine Running (KOER) On-Demand Self-Test >> Purpose: >> Notes

11. Carry Out The Key On Engine Running (KOER) On-Demand Self-Test: Purpose:: Notes

WARNING: This page does not describe the selected car, but rather 8 other vehicles, including the 2006 Ford RV Cutaway, 2006 Ford Pickup, 2006 Ford F550 Super Duty, 2006 Ford F450 Super Duty, and 2006 Ford Econoline. However, it is still accessible from the selected car via links, so may be relevant.

The purpose of this test is to determine if the PCM has detected any fault conditions that would cause a performance problem while the engine is running. The KOER self-test will carry out step tests on the injection control pressure system and the exhaust back pressure system.

Step tests are PCM controlled tests where the PCM commands a specific exhaust back pressure or injection control pressure (ICP) and then measures the result. If a predetermined threshold is not reached, a DTC will be generated. This test can be carried out at any engine temperature.