DTC P0191: Fuel Rail Pressure Sensor A Circuit Range/Performance
WARNING: This page does not describe the selected car, but rather 30 other vehicles, including the 2006 Mercury Mountaineer, 2006 Mercury Monterey, 2006 Mercury Montego, 2006 Mercury Mariner, and 2006 Mercury Grand Marquis. However, it is still accessible from the selected car via links, so may be relevant.
P0191 - FUEL RAIL PRESSURE SENSOR A CIRCUIT RANGE/PERFORMANCE
| Description: | The comprehensive component monitor (CCM) checks the fuel rail pressure (FRP) sensor for an acceptable fuel pressure. The test fails when the fuel pressure falls below or exceeds a minimum/maximum calibrated value for a calibrated period of time. | ||
| Possible Causes: |
|
||
| Diagnostic Aids: | A FRP PID value during key ON, engine running of 138 kPa (20 psi) to 413 kPa (60 psi) is acceptable. | ||
| Application | Key On Engine Off | Key On Engine Running | Continuous Memory |
| All | GO to Pinpoint Test DD . | ||