LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2000 >> Contour SE, 2.0 3, Standard >> Repair and Diagnosis >> External Pages >> Different car >> Section 1326 (Engine Controls - Diagnostic Methods (Except Diesel & Hybrid)) >> Diagnostic Monitoring Test Results - Mode 6

Diagnostic Monitoring Test Results - Mode 6

WARNING: This page does not describe the selected car, but rather 31 other vehicles, including the 2006 Mercury Mountaineer, 2006 Mercury Monterey, 2006 Mercury Montego, 2006 Mercury Milan, and 2006 Mercury Mariner. However, it is still accessible from the selected car via links, so may be relevant.

The purpose of mode 6 is to allow access to the results of on-board diagnostic (OBD) monitor diagnostic test results. The test values are stored at the time of the particular monitor completion. Refer to Mode 6 on the diagnostic tool for test information.

scientia non olet · About LEMON Manuals