LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2000 >> Contour SE, 2.0 3, Standard >> Repair and Diagnosis >> External Pages >> Different car >> Section 132 (Instrument Panel - Analog - BLACKWOOD) >> Removal & Installation >> Instrument Cluster >> Removal & Installation

Removal & Installation

WARNING: This page is about a different car, the 2002 Lincoln Blackwood. However, it is still accessible from the selected car via links, so may be relevant.
  1. Disconnect negative battery cable. Remove headlight switch. See HEADLIGHT SWITCH . Carefully release 4 retaining clips and remove steering column opening cover.
  2. Remove 7 instrument cluster finish panel bolts. Remove instrument cluster finish panel. Remove 4 instrument cluster bolts. Disconnect electrical harness connectors. Remove instrument cluster. Remove transmission range indicator (if equipped). To install, reverse removal procedure.
scientia non olet · About LEMON Manuals