LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2000 >> Contour SE, 2.0 3, Standard >> Repair and Diagnosis >> External Pages >> Different car >> Section 1312 (Glass, Frames And Mechanisms) >> Removal And Installation >> Windshield Moulding >> Removal and Installation

Removal and Installation

WARNING: This page is about a different car, the 2005 Lincoln LS. However, it is still accessible from the selected car via links, so may be relevant.
NOTE: The LH side is shown, the RH side is similar.
  1. Remove the 5 windshield moulding screws.
  2. Remove the pin-type retainer and the windshield moulding.
  3. To install, reverse the removal procedure.