LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2000 >> Contour SE, 2.0 3, Standard >> Repair and Diagnosis >> External Pages >> Different car >> Section 1311 (Seating) >> Removal And Installation >> Heated Seat Switch - Rear >> Removal and Installation

Removal and Installation

WARNING: This page is about a different car, the 2005 Lincoln LS. However, it is still accessible from the selected car via links, so may be relevant.
  1. Detach the bezel housing from the door trim panel.
  2. Disconnect the power window and heated seat switch electrical connectors.
  3. Detach and remove the heated seat switch from the bezel housing.
  4. To install, reverse the removal procedure.
scientia non olet · About LEMON Manuals