LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2000 >> Contour SE, 2.0 3, Standard >> Repair and Diagnosis >> External Pages >> Different car >> Section 1297 (Exterior Lighting) >> Removal And Installation >> Side Lamp/Front Turn Signal Lamp Bulb >> Removal and Installation

Removal and Installation

WARNING: This page is about a different car, the 2005 Lincoln LS. However, it is still accessible from the selected car via links, so may be relevant.
  1. Remove the headlamp assembly. For additional information, refer to HEADLAMP ASSEMBLY  in this article.
  2. Remove the 3 side marker module screws.
  3. Remove side marker module bracket and seal.
  4. Disconnect the electrical connector.
  5. Remove the side marker module.
  6. To install, reverse the removal procedure.